ALL-100 常见问题解答

Q01 : ALL-100和ALL-11P3有什么不一样? 

A01 : ALL-100 是我们最新推出的编程器,集成通用和量产在一起. ALL-100的操作和ALL-11P3类似,
但ALL-100 内置USB2.0 接口,提供了高达480Mbit/sec的传输速度, 还有ALL100内置的MCU是 16bit/96MHz MCU,
性能更出色. 


Q02 : 我的电脑可以安装ALL-100吗? 

A02 : 目前,ALL-100支持下述操作系统: Windows 98 SE / ME / 2000 SP4 / XP SP1 / 2003 server 或更高版本,
 同时支持更包括USB1.1 和 USB2.0.,其中USB2.0 性能更高. 


Q03 : Why doesn't ALL-100 work after installation? 

A03 : Under OS Win 2000, please make sure the system had been upgraded to SP4; under OS Win XP, please make sure the system had been upgraded to SP1. 


Q04 : What is the range of programming voltage offered by ALL-100? 

A04 : VCC: 1.8V~5V; VHH: 5V~12V; VOP: 9V~25V. Furthermore, the prog. voltage and I/O voltage are separated.


Q05 : Does ALL-100 just program one device at a time? 

A05 : No! At present, ALL-100 can program 1 or 4 or 6 or 8 devices simultaneously with different module mounted. 


Q06 : What is the difference between Single Socket Module & Gang Module? 

A06 : Single Socket Module can only program one device at a time, but Gang Module can program 4 or 6 or 8 devices simultaneously. 


Q07 : Besides USB transmitting interface, does ALL-100 support other else?

A07 : No! Currently ALL-100 only supports USB interface.


Q08 : May I use the previous adapter to run ALL-100? 

A08 : Yes, most of the previous adapters still work well on ALL-100. 


Q09 : Does ALL-100 support ISP (in-circuit programming)? 

A09 : No, generally we don't recommend! Wired out to PCB from ALL-100 may cause power current insufficient. 


Q10 : What shall I do when the message "Module Error!" appears? 

A10 : It means the Module currently mounted on ALL-100 does not match the correct Module it should be used for ICs to be programmed. Please check for appropriate Module P/N. 


Q11 : Is one PC only able to connect to one set of ALL-100? 

A11 : No! One PC can connect to utmost 8 sets of ALL-100. 


Q12 : How can I identify each ALL-100 when several sets of them are connected to the same PC? 

A12 : The "SITE#" on rear panel of each programmer provides user to identify the order of programmer from #1 to #8 and the #number can not be repeated in the system. 


Q13 : Can each ALL-100 program different IC type when several sets of them are connected to the same PC? 

A13 : No! All of the connected programmers can only program the same IC type simultaneously. 


Q14 : My PC has USB port and the OS also had been upgraded, but ALL-100 still can't work. What shall I do? 

A14 : Various motherboards in the market have somewhat different feature and cause compatibility problem. So choose our identified PCI to USB2.0 Card or USB2.0 Hub to avoid the problem. 


Q15 : Does each pin built in ALL-100 provide the complete Pin Driver signals? 

A15 : Yes, each pin can provide 16 functional signals such as VCP, VHH, VOP, TTLHi, TTLLo, CAP, Oscillator, etc.


Q16 : Can't find my desired IC Type from the device list. Does that mean it isn't supported? 

A16 : Mostly we are willing to support programming software for the new devices. Depending on chip complexity, usually it takes 2~3 weeks. The process can be shortened if customer can provide 8~10 samples for testing. In most cases, an existing adapter/converter can support new devices as well, but sometimes a new adapter is required. We try to cover a broad range of IC types into our device list; however, some devices may hardly be supported due to the complexity or less demand. 


Q17 : How to download programming file? 

A17 : 1. Download the complete set of programming file - ALL100.EXE2. Executing and unzipping the file ALL100.EXE, then executing the file SETUP.EXE. For single socket module (M1-XXX-XXX Module):
ftp://ftp.hilosystems.com.tw/pub/download/all100/ALL100.EXE
For gang module (M4-XXX-XXX or M8-XXX-XXX Module):
ftp://ftp.hilosystems.com.tw/pub/download/all100gang/ALL100GANG.EXE 


Q18 : How to run self-diagnostics? 

A18 : You may run the simple tester diagnostics according to the instruction below:
* Please dismount Module before test!